Ceiling Wallpaper Installation Costs & Tips
When it comes to ceiling wallpapering, it demands a much higher level of skill from the worker compared to wall installations. Your final quote will vary widely depending on the size of the area and the materials you choose. In this post, we'll break down how the scope of work is calculated, walk you through the actual process, and give you guidelines for timing and budgeting.
How to Choose Wallpaper and Supplies for Ceiling Installation
When working on the upper surfaces, you need to select materials that are durable against stains and easy to install, as they have to support the weight. You'll usually choose between wallpaper (Hapji) or silk wallpaper. The difference between these two often comes down to the cost of the material and the extra labor involved. Wallpaper is installed by overlapping two sheets, while silk wallpaper has a PVC coating that can make your space feel more open.
The first step when you visit a supply store or a material distributor is to accurately calculate the number of rolls you need based on the square footage. Generally, for a standard living room or bedroom, you'll need about 1.5 to 1.7 times the actual square footage in materials. While more people are opting for DIY by ordering roll wallpaper online and installing it themselves, be careful because the paper can get bumpy before the paste dries.
If you have areas with signs of leaks or structural stress, you'll need to add extra layers, like non-woven fabric or mesh (Nebari), during the prep work to smooth out any uneven spots. If you just peel off the old wallpaper and start applying new ones, the ceiling might sag over time, so be prepared for extra charges for surface leveling. When getting quotes, it is essential to confirm whether the cost includes removal and disposal fees.
Actual Ceiling Wallpaper Costs Based on Area and Labor
The total cost usually breaks down into labor, materials, and expenses like meals and site cleanup. Even if the area is small, there is a minimum daily labor charge. There's a difference in pricing whether you are only doing a partial job on the ceiling of a 25-pyeong apartment versus doing the entire space at once. For a single professional worker, the daily labor rate typically ranges from 200,000 to 250,000 Korean Won, depending on the location and their experience.
| Scope of Work | Estimated Time | Estimated Cost Range | Key Features |
|---|---|---|---|
| Single Room (1 unit) | 3 to 4 hours | 150,000 to 300,000 KRW | Can be done for spot repairs or while living in the home |
| Entire 25-pyeong Apartment | 1 day | 1,200,000 to 1,800,000 KRW | Standard estimate including walls |
| Upper Area Only of 34-pyeong Apartment | 1 day | 800,000 to 1,300,000 KRW | Includes light fixture removal and old wallpaper removal |
The number of workers needed depends on the size of the job and whether you have furniture to move. If you are working in a home where people live, the time spent moving belongings will increase the overall job duration. When planning your total budget for flooring and wallpaper, you also need to consider whether you are replacing the flooring and how the baseboards will be finished to keep your spending under control. Specifically, when calculating the cost for a 34-pyeong apartment ceiling, be aware that extra fees will apply if the ceiling height is high or if you have a tray ceiling structure.
Some jobs require renting equipment or using a scissor lift, so it’s safest to clarify the total cost before signing any contract. Be cautious because some contractors sometimes omit supply items from the estimate and then ask for extra money later. Depending on the site conditions, you might also be charged for parking limitations or elevator usage fees.
What to Do Before Ceiling Wallpaper Installation: Your Pre-Job Checklist
There are several things the homeowner or resident needs to take care of before the installation day to ensure everything goes smoothly. Ideally, you should completely move all furniture and appliances out of the work area so the installers have a safe place to set up ladders and move around. To prevent delays, make sure to either remove light fixtures beforehand or coordinate the removal and reinstallation schedule with the crew.
- The day before work, move all furniture and belongings to the center of the room and cover them with plastic to keep dust away.
- If you notice any signs of leaks or condensation, you must wait until the area is completely dry before scheduling the installation to avoid future issues.
- Discuss the finishing method around fixed items like air conditioners or indoor fans with the installers in advance.
- If you have pets, move them to another area during the work so they aren't stressed by the smell of paste or the noise.
The most common mistake people make during the prep phase is putting wallpaper directly over mold that hasn't dried completely. Mold can reactivate in damp conditions and push through the wallpaper, so you absolutely must treat it with a specialized cleaner to eliminate the roots. A good trick for areas near exterior walls with poor insulation is to apply an extra layer of waterproof undercoating.
On the day of the job, keeping the indoor temperature too high can cause the paste to dry too quickly, leading to defects like seams pulling apart or tearing. Natural drying is the best approach, so don't blast the area with a strong heater or point a fan directly at it. For the first 2 to 3 days after installation, keep the windows closed to encourage slow drying, which helps you achieve a perfectly flat surface.
The Process: Removing Old Wallpaper and Smoothing the Base
If you just layer new material over old fixtures without completely removing them, the weight can cause the ceiling to sag or bulge. The time it takes to soften the old wallpaper and the tools you need will depend on whether the existing paper is a light paste or a heavy vinyl (silk). In older apartments with uneven concrete surfaces, the patching work to fill in dips can take up more than half the entire job.
- Soften the existing wallpaper and undercoating using a steamer or spray bottle, then carefully scrape it off with a scraper.
- Fill any cracks or dips in the concrete surface with joint compound or putty, then smooth it out with a trowel.
- Once the putty is fully dry, sand the surface with fine sandpaper to eliminate any bumps or uneven spots.
- To prevent the seams from lifting later, tightly apply non-woven fabric or mesh as the undercoating.
If the foundational work is sloppy, you are guaranteed to get air pockets inside the wallpaper as it dries, resulting in a bumpy finish. Especially in new buildings where the cement is exposed, you must apply a primer first to boost the paste's adhesion. The reason experts charge several hundred thousand won just for this foundational work is that the quality of this stage determines how long the final result will last.
Since the ceiling is far from eye level, you might not notice tiny ripples, but they become obvious when the lights are on and cast shadows. Therefore, it’s important to get into the habit of checking that the paper is sealed tightly around light boxes and inside curtain boxes. Installation teams with extensive experience in wallpapering always dedicate the most time to smoothing the base.
What to Expect During Drying and How to Handle Repairs After Ceiling Wallpapering
Right after the work is done, your ceiling will look a bit wavy and damp because it's still saturated with adhesive. This is completely normal physics. Depending on your indoor humidity and temperature, it should smooth out and become taut within three days, or sometimes up to a week. If you force the use of an air conditioner or space heater during this time, the materials will shrink unevenly, which can cause the seams to pop.
The general rule is to keep the room closed up while it dries. However, if you seal it completely without any airflow, mold can grow, so make sure to ventilate for short periods once or twice a day. If you notice any lifting or peeling after the wallpaper has dried completely, you must contact the installation company immediately to request an A/S (after-sales service). Typically, the warranty period for defects is set for up to one year from the date of installation, and they will address issues based on whether the problem is material failure or installation error.
If the corners start to separate after some time, you can usually fix it simply by gently pushing a small amount of wallpaper paste into the gap using a syringe and then pressing it down with a dry towel. However, if the discoloration or mold is due to a leak, that isn't an installation defect, so you need to fix the root cause first before doing any touch-ups to avoid spending money twice. Especially in the winter, drafts can cause condensation due to the temperature difference between indoors and outdoors, so regular ventilation is crucial.
Frequently Asked Questions About Ceiling Wallpapering
What happens if I apply new wallpaper over existing wallpaper without removing it?
If you put new paper over old paper that has absorbed moisture and become saggy, the weight might cause the entire surface to droop or fall off. If you have multiple layers stacked up, you absolutely must remove the old material and perform a proper undercoating (chobae) for a clean finish.
Can I get just the ceiling wallpapered while I'm living in the house?
It is possible to have the work done while you live there, provided you consolidate your belongings in the center of the room and take thorough protective measures. However, the process will cause daily disruption due to moving and organizing. Your best bet is to schedule the work when no one is home, or to break the job down by room.
Why do the seams separate after the wallpaper is installed?
If you raise the indoor temperature too high right after installation or try to dry it out too quickly by opening windows, the paste dries rapidly and shrinks, causing the seams to pull apart. You must maintain a natural drying process and let it cure slowly over about three to five days.
If you're planning ceiling wallpapering, don't just chase the cheapest quote. You need to be smart and carefully compare the scope of the base surface preparation and the quality of the materials.
